DYNACORD C3600FDI

Марка: Dynacord
Арт. номер:
Наличност:
Ограничена наличност
Описание

DSP power amplifier 2x1800W, for Installation 
Fully integrated professional speaker processing with FIR Drive technology 
Market leading acoustic performance and rock solid reliability 
Low Z and 70/100V operation and power saving standby mode 
Intuitive system control software, makes setup and control easy 

Maximum Output Power, Bridged Load Impedance: 4 ohm=6000 W; 8ohm=3400 W; High Impedance: Not Recommended 
Maximum RMS Voltage Swing, THD = 1%, 1kHz 90.6V 
Voltage Gain ref.1kHz 32.0dB 
IMD-SMPTE, 60 Hz, 7 kHz <0.1% 
DIM 30 <0.05% (3.15 kHz, 15 kHz) 
Maximum Input Level +21 dBu 
Crosstalk < -80dB (ref. 1 kHz, at 100 W/4 ohm) 
Frequency Response 10 Hz to 21 kHz (±1 dB) 
Input Impedance, active balanced 20kohm 
Signal-to-Noise Ratio (A-weighted) >109dB 
Output Noise , A-weighted <-68dBu 
Output Stage Topology Class H 
Power Requirement 240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured) 
Power Consumption 850 W (1/8 Maximum Output Power @4ohm) 
Protection Audio limiters, high temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay 
Cooling Front-to-rear, 3-stage-fans 
Safety Class I 
Available Color Black 
Height 88mm (3.46") 
Width 483mm (19.02") 
Depth 462.4mm (18.2") 
Weight Net 18.2kg (40.12 lbs) 
Signal Processing FIR Filters, Audio Limiters Output delay per channel, 31 band GEQ per channel, PEQ per channel, Load impedance 
High Impedance Operation 70V Operation & 100V Operation 
Mains Fuse 240 V/230 V: T10AH; 120 V/100 V: T20AH 
Operating Temperature Range +5°C to +40°C (40°F to +105°F) 
Total Harmonic Distortion <0.05% (at 1200 W/4 ohm MBW = 80 kHz, 1 kHz)