Oberton 15XB700

В някои случаи Производството отнема 10 раб. дни Свържете се с нас за наличност !
Марка: Oberton
Арт. номер:
Наличност:
В наличност
345 лв 294 лв


Купи на кредит с ТБИ Банк
*Безплатната доставка не важи за намалени артикули.
количество:
Описание
Application : Extended low frequency woofer
SPECIFICATIONS THIELE-SMALL PARAMETERS
Nominal Diameter
Impedance
Minimum Impedance
Power Capacity AES ¹
Power Capacity ²
Program Power ³
Sensitivity
Frequency Range
Voice Coil Diameter
Voice Coil Material
Voice Coil Former
Voice Coil Winding Depth
Magnet Gap Depth
Cone Material
Basket
Magnet
Flux Density
15"/385 inch/mm
8 Ohm
7.05 Ohm
1000 W
700 W
2000 W
(100-200 Hz) 95 dB/W/m
37 - 2000 Hz
100 mm
Copper
Kapton™
25 mm
14 mm
Paper
Die cast aluminium
Ferrite
0.98 T
1. AES standard. Power is calculated on rated minimum impedance.
2. Measurement is in 125 L box enclosure tuned 56 Hz using a 40-400 Hz band limited pink noise test signal applied continuously for 2 hours.
3. Program power is defined as 3db greater than AES Power Capacity.
Resonance Frequency
Mechanical Efficiency Factor (Qms)
Electrical Efficiency Factor (Qes)
Total Q (Qts)
Equivalent Air Volume (Vas )
Diaphragm mass ind. airload (Mms)
Voice Coil Resistance Re
Effective Diagram Area (Sd)
Peak Linear Displacement of Diaphragm (Xmax)
Mechanical Compliance of Suspension (Cms)
BL Product (BL)
V.C. Inductance at 1 kHz (Le)
37.2 Hz
9.2
0.292
0.283
111.02 Litres
158.39 grams
5.19 Ohms
829.6 cm2
±9 mm
0.115
25.64 T.m
1.9 mH
* Linear Mathematical Xmax is calculated as: (Hvc - Hg)/2 + Hg/4 where Hvc is the voice coil depth and Hg is the gap depth.
MOUNTING INFORMATION
Overall Diameter
Baffle Hole Diameter
Number of Mounting Holes
Bolt Circle Diameter
Overall Depth
Net Weight
388 mm
354 mm
8 with dia. 7mm
370 / 372 mm
179.4 mm
11.95 kg

15 XB 700 is a high power long coil 15 inch bass loudspeaker design to reinforce low frequency range at very high sound power levels. It features a 4” sandwich voice coil, vented aluminium frame 220 mm magnet structure and double spider assembly. It is suitable for tuned reflex or horn loaded enclosures for high level subwoofer applications.